6-port Gigabit managed POE+ Switch

Varenr: 126135
StandardsIEEE 802.3af/at for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
 Software Features
ManagementIPv4/IPv6, SNMP v1/v2c/v3, LLDP, Port Mirror, DDM, RMON, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SMTP, RARP, Telnet, Syslog, SNMP Inform, Flow Control, Back Pressure Flow Control
Filter802.1Q VLAN, Port-Based VLAN, GVRP, IGMP v1/v2/v3, GMRP
Redundancy ProtocolsSTP, RSTP, MSTP, Turbo Ring v1/v2, Turbo Chain, Link Aggregation, V-ON
SecurityRADIUS, TACACS+, MAB Authentication, HTTPS, SSL, SSH,Broadcast Storm Protection, Port Lock, MAC ACL, MAC Sticky, NTP Authentication, SMTP with TLS
Time ManagementSNTP, NTP Server/Client, IEEE 1588v2 PTP (software-based)
Industrial ProtocolsEtherNet/IP, Modbus/TCP, PROFINET IO
MIBMIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
 Switch Properties
Priority Queues4
Max. Number of VLANs4096
VLAN ID RangeVID 1 to 4094
IGMP Groups256
MAC Table Size16 K
Packet Buffer Size12 Mbits
RJ45 Ports10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speed
Fiber Ports100/1000BaseSFP slot
Console PortUSB serial console (Type B connector)
PoE Pinout2-Pair PoE Mode: V+, V+, V-, V- for pins 1, 2, 3, 6 (Endspan, MDI, Mode A)
DIP SwitchesTurbo Ring, Master, Coupler, Reserve
Alarm Contact1 relay output with current carrying capacity of 0.5 A @ 48 VDC
Digital Inputs1 input with the same ground, but electrically isolated from the electronics.• +13 to +30 V for state “1”
• -30 to +3 V for state “0”
• Max. input current: 8 mA
 Power Requirements
Input Voltage12/24/48 VDC, redundant dual inputs (> 50 VDC for PoE+ or 60W output recommended)
Operating Voltage12 to 57 VDC
Input Current4.08 A @ 48 VDC
Overload Current ProtectionPresent
Connection2 removable 4-contact terminal blocks
Reverse Polarity ProtectionPresent
Power ConsumptionMax. 18.96 W full loading without PDs' consumption
Power Budget• Max. 180 W for total PDs’ consumption @ 48 VDC input
• Max. 150 W for total PDs’ consumption @ 24 VDC input
• Max. 62 W for total PDs’ consumption @ 12 VDC input
• Max. 60 W for each PoE port
 Physical Characteristics
IP RatingIP40 protection
Dimensions49.1 x 135 x 116 mm (1.93 x 5.31 x 4.57 in)
Weight910 g (2.00 lb)
InstallationDIN-rail mounting, wall mounting (with optional kit)
 Environmental Limits
Operating TemperatureStandard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
 Standards and Certifications
NotePlease check Moxa’s website for the most up-to-date certification status.
SafetyUL 61010-2-201, EN 61010 (LVD)
EMCEN 61000-6-2/6-4
EMICISPR 22, FCC Part 15B Class A
EMSEN 61000-4-2 (ESD): Contact: 8 kV; Air: 15 kV
EN 61000-4-3 (RS): 80 MHz to 1 GHz: 20 V/m
EN 61000-4-4 (EFT): Power: 4 kV; Signal: 4 kV
EN 61000-4-5 (Surge): Power: 4 kV; Signal: 4 kV
EN 61000-4-6 (CS): 10 V
EN 61000-4-8
Electrical SubstationsIEC 61850-3, IEEE 1613
Traffic ControlNEMA-TS2
Rail TrafficEN 50121-4
ShockIEC 60068-2-27
FreefallIEC 60068-2-31
VibrationIEC 60068-2-6
 MTBF (mean time between failures)
Time755,167 hrs
StandardTelcordia (Bellcore), GB
Warranty Period5 years
DetailsSee www.moxa.com/warranty
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.